The Second-hand CNC sawing machine itself has the characteristics of high precision, large rigidity, you can choose the favorable saw industry processing dosage, has a high production efficiency, is the general ordinary band sawing machine 3-5 times. So, do we know how to hand saw a second-hand CNC sawing machine? Today, IJKU will give you a detailed introduction.
1. After starting the system, set the selection switch to manual state, then enter the manual screen, press the "oil pump motor" button to start the oil pump, raise the saw machine to the upper limit, tighten the saw band, and release the vice, so as to put the workpiece on the work table.
2. Press the "feed" button to adjust the workpiece to the saw cutting size, and then press the "front clamp" button. After clamping the workpiece, press the "saw wheel motor" to start the saw belt rotation.
3. Adjust the speed regulating valve knob to the appropriate speed of descent, press "work feed", then the saw machine will work. After the sawing is completed, the band saw machine will automatically reset.
4, manual sawing process can press the "manual pause" button to stop the saw frame drop and saw wheel rotation, "total stop" button can realize the shutdown, that is, eliminate all the working state.
5. After the saw band breaks, the saw machine will stop automatically. At this time, you can press the "fast back blade" button to raise the saw frame, then replace the saw blade, tighten the saw band and press the "Manual Continue" button to continue working.
The above content is about a second-hand CNC sawing machine and how to manual sawing in detail. I hope to help you.