5 thoughts on “What welding material is EQNICRMO-3?”
Tina
Strip ENICRMO-3 is welded, and nickel-based high-temperature alloy materials The features and application fields (Boximot Steel Excerion): Nickel -based deformation of high -temperature alloy, with excellent corrosion resistance and high oxidation performance, has good stretching and fatigue performance from low temperature to 980 ° C, and stress corrosion in the atmosphere of salt and fog. Therefore, it can be widely used in manufacturing aviation engine parts, aerospace structure components and chemical equipment. Stop cards: NS336, GH3625, GH625 (China), NC22DNB (France), W.NR.2.4856 (Germany), N06625
Structure: The organization of the alloy in the solid -soluble state is the Austenite matrix and a small amount of TIN, NBC, and M6C. After the long -term timeliness of 650 ~ 900 ° C, the precipitated phase is γ, Δ, M23C6, and M23C6 and M6C. The thermal treatment system: a rod, forging, (1090 ~ 1200) ℃*(1.5 ~ 2) H/WQ b silk material, (1090 ~ 1200) ° C ≥ air cooler, where D. ≤3mm, insulation (9 ~ 15) min, d3 mm ~ 5 mm, insulation (15 ~ 20) min; c hot -rolled board, (950 ~ 1030) ℃/AC, HB ≤ 305HV D welding welding Pieces, stress annealing: (1080 ~ 1100) ° C ≥ air cooling rate, of which D ≤ 3mm, insulation (9 ~ 15) min, d3 mm ~ 5 mm, insulation (15 ~ 20) min; e pipe, (960 960 ~ 1030) ℃/AC or WQ Craft performance and requirements: 1. The alloy has good cold and thermal forming performance, and the heating temperature of steel ingots is 1120 ° C. 2, the average size of the alloy is closely related to the deformation of the forging part and the final forging temperature. 3, the welding performance of the alloy is good. In the protective atmosphere, tungsten poles or base alloy are used for raw arc welding. The welding recommendation uses AWS A5.14 welding wire EricRMO-3 or AWS A5.11 stripes ENICRMO-3 4, surface treatment process: remove alkali when removed the alloy surface oxidation, and then nitrate, hydrofluoric acid, hydrofluoric acid, hydrofluoric acid -This in the water solution. 5. When the processing volume is greater than 15%during cold processing, annealing should be performed after heat processing. Ifangs: The components of the organic chemical process process of chloride, especially in the occasion of using acid chloride catalysts; ; The absorption tower, heating device, flue gas imported baffle, fan (humid), mixer, diversion board and flue, etc. Equipment and components of the gas environment; The acetic acid and ethidine reaction generator; Sulfate condenser, etc. This welding: The welding of alloy is recommended to use AWS A5.14 welding wire Ericrmo-3 or AWS A5.11 welded adicrmo-3 Steel, forged, flange, rings, welded pipes, steel belts, straight strips, silk materials and supporting welds, round cakes, flat steel, hexagonal rods, size heads, elbows, three links, processing contributions, bolt nuts, tight tightness, tightness, tight Fixedware
ERNICRMO-3 welding wires are often become 625 welding wires.
used for welding 625 (N06625) alloy and 20 alloy, 825, 25-6mo, 9%NI steel, or other molybdenum steel, etc. Corrosion -resistant pile welding. High -temperature and ultra -low temperature mechanical properties are excellent. It is resistant to strong corrosion in broad oxidation and restoration of media.
because of high corrosion resistance, and can even be used for super -stainless steel 904L. If it is not a special high -temperature operating condition, it can also be used for the Inconel series alloy 600, 601 and Incoloy series alloy 800, 800, 800, 800h material welding.
The INCONEL 625 welded wire can be used to welded incone 625 alloy or nickel steel, or the surface of the steel can be welded. Buried arc welding right. The weld metal has high strength and local erosion of local erosion in a wider temperature range. ernicrmo3 nickel -based alloy welding material
ERNICRMO-3 welding wires are often become 625 welding wires. It for welding 625 (N06625) alloy and 20 alloys, 825, 25-6mo, 9%NI steel, or other molybdenum steel, etc., can also be used for corrosion-resistant pile welding on the surface of the material. High -temperature and ultra -low temperature mechanical properties are excellent. It is resistant to strong corrosion in broad oxidation and restoration of media. Me high corrosiveness and can even be used for super -stainless steel 904L. If it is not a special high -temperature operating condition, it can also be used for welding of 800 and 800H of the Incone series alloy 600, 601 and Incoloy series alloys. The INCONEL 625 welding wire can be used to welded incone 625 alloy or nickel steel, or the surface welding of steel can be welded. When buried arc welding, the INCOFLUX 7 buried arc weld should be selected. The weld metal has high strength and local erosion of local erosion in a wider temperature range. The product includes straight tungsten tungsten arc (TIG) welding wire, disk gas protection (MIG) welding wire, market supply specifications: diameter: 3.2mm diameter: 2.4mm Diameter: 2.0mm Diameter: 1.6mm Diameter: 1.2mm Diameter: 1.0mm Diameter: 0.9mm
components of organic chemical processes containing chloride, especially using acid chloride catalysts Scenes; cookingrs and bleaching ponds used to manufacture the pulp and papermaking industry; the absorption tower, heating device, flue gas imported baffle, fan (humid), mixer, diversion, flue and flue -psione Wait; to manufacture equipment and components used in an acidic gas environment; acetic acid and ethidine response generator; sulfate condenser; pharmaceutical equipment; ripple tube expansion joints and other industries and products. : Physical performance: 3.1, density ρ = 8.4g/cm33.2, melting temperature 1290 ~ 1350 ℃ 5: Overview Inconel 625 is a Austenite super resistance with nickel as the main ingredients as the main ingredient. Thermal alloys. The reinforcement effect of molybdenum and solid -soluble -soluble -soluble -solubles contained in nickel chromium alloys has a high -intensity and extraordinary anti -fatigue specialtability at low temperature to 1093 ° C and is widely used in the aviation industry. Although the alloy is designed to adapt to the strength of the high temperature environment, the high content of the alloy chromium and molybdenum has a highly corrosion medium, from the high oxidation environment to the general corrosive environment, all of which have high corrosion and cracks. Excellent corrosion resistance. Incone 625 also has a super corrosion effect on the medium of chloride pollution such as seawater, geothermal water, neutral salt, and salt water.
Welding wire EricRMO-3, a stripe ENICRMO-3, is used to welded the material. /UNS N06625 is a nickel -based alloy material, which is resistant to high temperature and corrosion. The feature and application field Overview: This is a solid -soluble reinforced nickel -based deformation of high -temperature alloy with molybdenum cymbal as the main enhanced element. It has excellent corrosion resistance and high oxidation performance. From low temperature to 980 ℃ Both have good stretching and fatigue performance, and stress corrosion in the atmosphere of salt and fog. Therefore, it can be widely used in manufacturing aviation engine parts, aerospace structure components and chemical equipment. Stop card: uns N06625ns336 GH3625 GH625 (China), NC22dnb (France), W.NR.2.4856 (Germany) n Gold phase tissue structure: The tissue is the austenite matrix and a small amount of Tin, NBC, and M6C. After the long -term timeliness of 650 ~ 900 ° C, the precipitated phase is γ, Δ, M23C6, and M6C. The process performance and requirements: 1. The alloy has good cold and thermal forming performance, and the heating temperature of steel ingots is 1120 ° C. 2, the average size of the alloy is closely related to the deformation of the forging part and the final forging temperature. 3, the welding performance of the alloy is good. In the protective atmosphere, tungsten poles or base alloy are used for raw arc welding. 4. Surface treatment process: remove alkali when removing the alloy surface oxidation, and then pickle in nitric acid and hydrofluoric acid-water solution. 5. When the processing volume is greater than 15%during cold processing, annealing should be performed after heat processing. Ifangs: The components of the organic chemical process process of chloride, especially in the occasion of using acid chloride catalysts; ; The absorption tower, heating device, flue gas imported baffle, fan (humid), mixer, diversion board and flue, etc. Equipment and components of the gas environment; The acetic acid and ethidine reaction generator; Sulfate condenser, etc. This welding: The welding of alloy is recommended to use AWS A5.14 welding wire Ericrmo-3 or AWS A5.11 welded adicrmo-3 Steel, forged, flange, rings, welded pipes, steel belts, straight strips, silk materials and supporting welds, round cakes, flat steel, hexagonal rods, size heads, elbows, three links, processing contributions, bolt nuts, tight tightness, tightness, tight The firmware is limited. If you need to introduce more more details, please consult and understand.
Strip ENICRMO-3 is welded, and nickel-based high-temperature alloy materials
The features and application fields (Boximot Steel Excerion):
Nickel -based deformation of high -temperature alloy, with excellent corrosion resistance and high oxidation performance, has good stretching and fatigue performance from low temperature to 980 ° C, and stress corrosion in the atmosphere of salt and fog. Therefore, it can be widely used in manufacturing aviation engine parts, aerospace structure components and chemical equipment.
Stop cards:
NS336, GH3625, GH625 (China), NC22DNB (France), W.NR.2.4856 (Germany), N06625
Structure:
The organization of the alloy in the solid -soluble state is the Austenite matrix and a small amount of TIN, NBC, and M6C. After the long -term timeliness of 650 ~ 900 ° C, the precipitated phase is γ, Δ, M23C6, and M23C6 and M6C.
The thermal treatment system:
a rod, forging, (1090 ~ 1200) ℃*(1.5 ~ 2) H/WQ
b silk material, (1090 ~ 1200) ° C ≥ air cooler, where D. ≤3mm, insulation (9 ~ 15) min, d3 mm ~ 5 mm, insulation (15 ~ 20) min;
c hot -rolled board, (950 ~ 1030) ℃/AC, HB ≤ 305HV
D welding welding Pieces, stress annealing: (1080 ~ 1100) ° C ≥ air cooling rate, of which D ≤ 3mm, insulation (9 ~ 15) min, d3 mm ~ 5 mm, insulation (15 ~ 20) min;
e pipe, (960 960 ~ 1030) ℃/AC or WQ
Craft performance and requirements:
1. The alloy has good cold and thermal forming performance, and the heating temperature of steel ingots is 1120 ° C.
2, the average size of the alloy is closely related to the deformation of the forging part and the final forging temperature.
3, the welding performance of the alloy is good. In the protective atmosphere, tungsten poles or base alloy are used for raw arc welding.
The welding recommendation uses AWS A5.14 welding wire EricRMO-3 or AWS A5.11 stripes ENICRMO-3
4, surface treatment process: remove alkali when removed the alloy surface oxidation, and then nitrate, hydrofluoric acid, hydrofluoric acid, hydrofluoric acid -This in the water solution.
5. When the processing volume is greater than 15%during cold processing, annealing should be performed after heat processing.
Ifangs:
The components of the organic chemical process process of chloride, especially in the occasion of using acid chloride catalysts;
;
The absorption tower, heating device, flue gas imported baffle, fan (humid), mixer, diversion board and flue, etc. Equipment and components of the gas environment;
The acetic acid and ethidine reaction generator;
Sulfate condenser, etc.
This welding:
The welding of alloy is recommended to use AWS A5.14 welding wire Ericrmo-3 or AWS A5.11 welded adicrmo-3
Steel, forged, flange, rings, welded pipes, steel belts, straight strips, silk materials and supporting welds, round cakes, flat steel, hexagonal rods, size heads, elbows, three links, processing contributions, bolt nuts, tight tightness, tightness, tight Fixedware
ERNICRMO-3 welding wires are often become 625 welding wires.
used for welding 625 (N06625) alloy and 20 alloy, 825, 25-6mo, 9%NI steel, or other molybdenum steel, etc. Corrosion -resistant pile welding. High -temperature and ultra -low temperature mechanical properties are excellent. It is resistant to strong corrosion in broad oxidation and restoration of media.
because of high corrosion resistance, and can even be used for super -stainless steel 904L. If it is not a special high -temperature operating condition, it can also be used for the Inconel series alloy 600, 601 and Incoloy series alloy 800, 800, 800, 800h material welding.
The INCONEL 625 welded wire can be used to welded incone 625 alloy or nickel steel, or the surface of the steel can be welded. Buried arc welding right. The weld metal has high strength and local erosion of local erosion in a wider temperature range.
ernicrmo3 nickel -based alloy welding material
ERNICRMO-3 welding wires are often become 625 welding wires.
It for welding 625 (N06625) alloy and 20 alloys, 825, 25-6mo, 9%NI steel, or other molybdenum steel, etc., can also be used for corrosion-resistant pile welding on the surface of the material. High -temperature and ultra -low temperature mechanical properties are excellent. It is resistant to strong corrosion in broad oxidation and restoration of media.
Me high corrosiveness and can even be used for super -stainless steel 904L. If it is not a special high -temperature operating condition, it can also be used for welding of 800 and 800H of the Incone series alloy 600, 601 and Incoloy series alloys.
The INCONEL 625 welding wire can be used to welded incone 625 alloy or nickel steel, or the surface welding of steel can be welded. When buried arc welding, the INCOFLUX 7 buried arc weld should be selected. The weld metal has high strength and local erosion of local erosion in a wider temperature range.
The product includes straight tungsten tungsten arc (TIG) welding wire, disk gas protection (MIG) welding wire, market supply specifications:
diameter: 3.2mm
diameter: 2.4mm
Diameter: 2.0mm
Diameter: 1.6mm
Diameter: 1.2mm
Diameter: 1.0mm
Diameter: 0.9mm
One: The grade solid -soluble reinforced nickel -based deformation high -temperature alloy
: Chemical ingredient carbon (C) ≤0.01, manganese (mn) ≤ 0.50, nickel (ni) ≥58, silicon (SI) ≤0.50 phosphorus (P ) ≤0.015, sulfur (s) ≤0.015, chromium (CR) 20.0 ～ 23.0, iron (Fe) ≤5.0, aluminum (al) ≤0.4, titanium (ti) ≤ 0.4, 铌 (nb) 3.15 ～ 4.15, cobalt (cobalt (cobalt (cobalt (cobalt ( CO) ≤1.0, molybdenum (MO) 8.0 ～ 10.0
three: Application scope application field:
components of organic chemical processes containing chloride, especially using acid chloride catalysts Scenes; cookingrs and bleaching ponds used to manufacture the pulp and papermaking industry; the absorption tower, heating device, flue gas imported baffle, fan (humid), mixer, diversion, flue and flue -psione Wait; to manufacture equipment and components used in an acidic gas environment; acetic acid and ethidine response generator; sulfate condenser; pharmaceutical equipment; ripple tube expansion joints and other industries and products.
: Physical performance: 3.1, density ρ = 8.4g/cm33.2, melting temperature 1290 ~ 1350 ℃
5: Overview Inconel 625 is a Austenite super resistance with nickel as the main ingredients as the main ingredient. Thermal alloys. The reinforcement effect of molybdenum and solid -soluble -soluble -soluble -solubles contained in nickel chromium alloys has a high -intensity and extraordinary anti -fatigue specialtability at low temperature to 1093 ° C and is widely used in the aviation industry. Although the alloy is designed to adapt to the strength of the high temperature environment, the high content of the alloy chromium and molybdenum has a highly corrosion medium, from the high oxidation environment to the general corrosive environment, all of which have high corrosion and cracks. Excellent corrosion resistance. Incone 625 also has a super corrosion effect on the medium of chloride pollution such as seawater, geothermal water, neutral salt, and salt water.
Welding wire EricRMO-3, a stripe ENICRMO-3, is used to welded the material.
/UNS N06625 is a nickel -based alloy material, which is resistant to high temperature and corrosion.
The feature and application field Overview:
This is a solid -soluble reinforced nickel -based deformation of high -temperature alloy with molybdenum cymbal as the main enhanced element. It has excellent corrosion resistance and high oxidation performance. From low temperature to 980 ℃ Both have good stretching and fatigue performance, and stress corrosion in the atmosphere of salt and fog. Therefore, it can be widely used in manufacturing aviation engine parts, aerospace structure components and chemical equipment.
Stop card:
uns N06625ns336 GH3625 GH625 (China), NC22dnb (France), W.NR.2.4856 (Germany) n Gold phase tissue structure:
The tissue is the austenite matrix and a small amount of Tin, NBC, and M6C. After the long -term timeliness of 650 ~ 900 ° C, the precipitated phase is γ, Δ, M23C6, and M6C.
The process performance and requirements:
1. The alloy has good cold and thermal forming performance, and the heating temperature of steel ingots is 1120 ° C.
2, the average size of the alloy is closely related to the deformation of the forging part and the final forging temperature.
3, the welding performance of the alloy is good. In the protective atmosphere, tungsten poles or base alloy are used for raw arc welding.
4. Surface treatment process: remove alkali when removing the alloy surface oxidation, and then pickle in nitric acid and hydrofluoric acid-water solution.
5. When the processing volume is greater than 15%during cold processing, annealing should be performed after heat processing.
Ifangs:
The components of the organic chemical process process of chloride, especially in the occasion of using acid chloride catalysts;
;
The absorption tower, heating device, flue gas imported baffle, fan (humid), mixer, diversion board and flue, etc. Equipment and components of the gas environment;
The acetic acid and ethidine reaction generator;
Sulfate condenser, etc.
This welding:
The welding of alloy is recommended to use AWS A5.14 welding wire Ericrmo-3 or AWS A5.11 welded adicrmo-3
Steel, forged, flange, rings, welded pipes, steel belts, straight strips, silk materials and supporting welds, round cakes, flat steel, hexagonal rods, size heads, elbows, three links, processing contributions, bolt nuts, tight tightness, tightness, tight The firmware
is limited. If you need to introduce more more details, please consult and understand.