5 thoughts on “wholesale jewelry starter kits Can the gold bracelet old clean?”
Lucy
aqua jewelry boxes wholesale 1. Clear the dust of the dust and the dust of the gold jewelry. The easiest way is to brush it gently with a soft brush dipped in hot water. However, cutting must not be scrubbed (such as toothpaste, polishing paste, fine sandpaper, or fine sand cloth, etc.) to avoid reducing the weight of the gold and causing losses.
2. When washing the pure gold necklace of the pure gold necklace, the pure gold necklace should be placed in the container, and then water is added to the container, and a small amount of ammonia water is added. Then the mouth is tightly covered, shaken back and forth, and then removed. When wearing a golden necklace, it should also be maintained with a buckle switch, and regularly drops a sewing machine oil to the switch to prevent the miniature spring in the switch rust.
3. The removal of gold jewelry white spots contains micro -mercury (mercury) in the commercially available cosmetics. For example, there are often phenyl hydroxyl mercury and skeleton meal chloride in the freckle cream. White spots or whiteness will appear after the gold jewelry is contacted. At this time, do not scrape or sandpaper with a small knife. As long as the white spots or white jewelry appear to bake in the fire, and then wipe it with a soft cloth, the gold jewelry will restore the original luster.
4. The surface dirt cleaning gold jewelry on the surface will be dull. At this time, you can use the flushing photos of the photo of the photo to flush it with the warm water from 30-40 ~ C, and dilute it with double the water. After soaking the dirt's gold jewelry for 4 to 6 minutes, use soft hair to use soft hair, then use soft hair. Wash the dirt and rinse with water several times. If you use fine woolen to dip the nail polish, the jewelry will be brighter.
5. Take warm water (40 ~ C) 1000 ml of warm water (40 ~ C), add 200 ml of methamphetamine to make a water solution, then put the gold jewelry into this cleaning solution for 10 minutes, then brush it with a brush, and then rinse it with water.
. If you take it to the gold shop, you must pay attention to the following three points:
. To choose a regular jewelry store, it is best to go to some large -scale and credible places, or check the qualification certification and business license of the jewelry store;
. It is best to understand the exact weight of your jewelry before cleaning, and record the weight. After processing, you must go to other departments in time and then call meter. When cleaning the jewelry, if the pungent smell is emitted in the solution, it is "Wang Shui". Remember to be careful to avoid losses;
three. It must ask for bills after paying the fee.
In the brief introduction of "Wang Shui" is what "Wang Shui" is
Wang Shui is also called "king acid", which is a very corrosive, yellow smoke The liquid, it is a mixture of nitric acid and hydrochloric acid, where the mixed ratio is 1: 3. It is one of the few substances that can dissolve gold and platinum. This is also the source of its name. However, some very inert metals, such as, are not corroded by king water. Wang Shui is used in the etching process and some analysis. Wang Shui quickly decomposed, so it must be made directly before use.
One of the king water
The king water is a mixture of thick HNO3 and thick HCL. The volume ratio of thick HNO3 to hydrochloric acid in the laboratory is 1: 3 formula
HNO3 3HCL = 2H2O CL2 NOCL n A series of strong oxidants such as isl, as well as high concentrations of chloride ions. The oxidation capacity of Wang Shui is stronger than nitric acid. "The King of China. The reaction equation of Wang Shui dissolved gold and platinum is as follows:
auo3 4HCl = H [AUCL4] NO 2H2O n3pt 4HNO3 18HCl = 3H2 [PTCL6] 4NO 8H2O
The colorless liquid mixed with 1 volume of concentrated nitric acid and 3 volumes of concentrated hydrochloric acid. Because it can dissolve other precious metals such as gold and platinum, the alchemy warlock is named Wang Shui. It is extremely corrosive, has a smell of chlorine gas, and is unstable in nature. It is prepared before use.
Min and platinum are not soluble in a separate concentrated nitric acid and dissolved in the king water, mainly because the king water not only contains nitric acid, new ecosystem chlorine and chloride nitride: HNO3 3HCl = NOCL 2CL 2H2O and high concentration of chloride ions at the same time. It forms a stable coordinate ion with metal ions, such as [AUCL4]- . Gold and it forms [AUCL4] -The standard electrode potential after the control ion: Wang Shui and other similar mixture are used to dissolve certain iron ore, phosphate rocks, slag, nickel chromium, Alloys, sin and selenium, and sulfides of mercury, arsenic, cobalt and lead.
wholesale stainless steel jewelry blanks There is no obvious dirt, in fact, there is no need to clean it frequently. The daily jewelry cleaning can use ultrasonic cleaning machine. The cleaning jewelry will become brighter, and for complex structural jewelry, it can also be cleaned in all aspects. It is a practical cleaning tool at home.
bridal jewelry wholesale companies No need to clean it frequently. If you are dirty, you can use ultrasonic cleaning, you can clean 360 ° without dead ends.
sterling silver jewelry making supplies wholesale Of course not good, pay attention to keep it clean, because always cleaning will let it lose weight. This is the most critical!
aqua jewelry boxes wholesale 1. Clear the dust of the dust and the dust of the gold jewelry. The easiest way is to brush it gently with a soft brush dipped in hot water. However, cutting must not be scrubbed (such as toothpaste, polishing paste, fine sandpaper, or fine sand cloth, etc.) to avoid reducing the weight of the gold and causing losses.
2. When washing the pure gold necklace of the pure gold necklace, the pure gold necklace should be placed in the container, and then water is added to the container, and a small amount of ammonia water is added. Then the mouth is tightly covered, shaken back and forth, and then removed. When wearing a golden necklace, it should also be maintained with a buckle switch, and regularly drops a sewing machine oil to the switch to prevent the miniature spring in the switch rust.
3. The removal of gold jewelry white spots contains micro -mercury (mercury) in the commercially available cosmetics. For example, there are often phenyl hydroxyl mercury and skeleton meal chloride in the freckle cream. White spots or whiteness will appear after the gold jewelry is contacted. At this time, do not scrape or sandpaper with a small knife. As long as the white spots or white jewelry appear to bake in the fire, and then wipe it with a soft cloth, the gold jewelry will restore the original luster.
4. The surface dirt cleaning gold jewelry on the surface will be dull. At this time, you can use the flushing photos of the photo of the photo to flush it with the warm water from 30-40 ~ C, and dilute it with double the water. After soaking the dirt's gold jewelry for 4 to 6 minutes, use soft hair to use soft hair, then use soft hair. Wash the dirt and rinse with water several times. If you use fine woolen to dip the nail polish, the jewelry will be brighter.
5. Take warm water (40 ~ C) 1000 ml of warm water (40 ~ C), add 200 ml of methamphetamine to make a water solution, then put the gold jewelry into this cleaning solution for 10 minutes, then brush it with a brush, and then rinse it with water.
. If you take it to the gold shop, you must pay attention to the following three points:
. To choose a regular jewelry store, it is best to go to some large -scale and credible places, or check the qualification certification and business license of the jewelry store;
. It is best to understand the exact weight of your jewelry before cleaning, and record the weight. After processing, you must go to other departments in time and then call meter. When cleaning the jewelry, if the pungent smell is emitted in the solution, it is "Wang Shui". Remember to be careful to avoid losses;
three. It must ask for bills after paying the fee.
In the brief introduction of "Wang Shui" is what "Wang Shui" is
Wang Shui is also called "king acid", which is a very corrosive, yellow smoke The liquid, it is a mixture of nitric acid and hydrochloric acid, where the mixed ratio is 1: 3. It is one of the few substances that can dissolve gold and platinum. This is also the source of its name. However, some very inert metals, such as, are not corroded by king water. Wang Shui is used in the etching process and some analysis. Wang Shui quickly decomposed, so it must be made directly before use.
One of the king water
The king water is a mixture of thick HNO3 and thick HCL. The volume ratio of thick HNO3 to hydrochloric acid in the laboratory is 1: 3 formula
HNO3 3HCL = 2H2O CL2 NOCL
n A series of strong oxidants such as isl, as well as high concentrations of chloride ions. The oxidation capacity of Wang Shui is stronger than nitric acid. "The King of China. The reaction equation of Wang Shui dissolved gold and platinum is as follows:
auo3 4HCl = H [AUCL4] NO 2H2O
n3pt 4HNO3 18HCl = 3H2 [PTCL6] 4NO 8H2O
The colorless liquid mixed with 1 volume of concentrated nitric acid and 3 volumes of concentrated hydrochloric acid. Because it can dissolve other precious metals such as gold and platinum, the alchemy warlock is named Wang Shui. It is extremely corrosive, has a smell of chlorine gas, and is unstable in nature. It is prepared before use.
Min and platinum are not soluble in a separate concentrated nitric acid and dissolved in the king water, mainly because the king water not only contains nitric acid, new ecosystem chlorine and chloride nitride:
HNO3 3HCl = NOCL 2CL 2H2O
and high concentration of chloride ions at the same time. It forms a stable coordinate ion with metal ions, such as [AUCL4]-
. Gold and it forms [AUCL4] -The standard electrode potential after the control ion:
Wang Shui and other similar mixture are used to dissolve certain iron ore, phosphate rocks, slag, nickel chromium, Alloys, sin and selenium, and sulfides of mercury, arsenic, cobalt and lead.
wholesale stainless steel jewelry blanks There is no obvious dirt, in fact, there is no need to clean it frequently.
The daily jewelry cleaning can use ultrasonic cleaning machine. The cleaning jewelry will become brighter, and for complex structural jewelry, it can also be cleaned in all aspects. It is a practical cleaning tool at home.
bridal jewelry wholesale companies No need to clean it frequently. If you are dirty, you can use ultrasonic cleaning, you can clean 360 ° without dead ends.
sterling silver jewelry making supplies wholesale Of course not good, pay attention to keep it clean, because always cleaning will let it lose weight. This is the most critical!
inspired jewelry wholesale not good