korean drama jewelry wholesale
5 thoughts on “korean drama jewelry wholesale How to DIY a small bench with a sense of design?”
Leave a Comment
You must be logged in to post a comment.
korean drama jewelry wholesale
You must be logged in to post a comment.
wholesale jewelry shop near me Prepare a slender strip of about seven or eight cm wide, which is about 1.5 times the length of the barrel. A round fabric with a radius of 1-2 cm than the radius radius. A rectangular cloth is three or four cm than the length of the barrel, and the width is five or six cm than the height of the barrel. Swall for the long side of the long strip fabric and the rectangular fabric, sew a pleated sewing every other distance, and grasp the interval and folding depth of the interval and folds. The sewn color is surrounded by the colors of the two fabrics, and then the round fabric is paved on the top. Then sew the side of the barrel, the two sides of the rectangular fabric. The excess part of the barrel ground is sewed out of the ring road with a circle of about one centimeter. Pay attention not to leave the two joints. Converse the whole sleeve, the color of the color is on the coat, put on a hard rope at the bottom of the ring road, close the mouth, tightened, and the excess head is hidden inside. Such a beautiful paper bench is ready!
costume jewelry parts supply wholesale The appearance of the small bench is designed with a small rectangular shape, and the lines are full and smooth, giving people a good texture visual effect. To retain the natural texture of raw materials, natural and beautiful, exuding a strong fashion atmosphere in the fine design. The net material is not allowed to be light, and the wood is straight, flat, consistent, and accurate right -angle. In the process of net materials, the two reference surfaces of the wood used in the end should be selected. For the worship of traditional furniture and woodworking technology, this small stool connected through the tenon -and -mortise structure was designed. The manufacturing process is traditional, but the change has made changes more playful and cute. Eyes and slots, eye -catching and slotting according to the design drawing. Shape, intercept and renovate the material board into design standard requirements. This is a complete dependence on tenonialism. It can be assembled and disassembled without glue, and it can also ensure a certain degree of firmness. This clever design is the first time to see. Through the production of this small bench, we know the basic method of making simple small bench. It can be made very simple or complicated, and it varies from the manufacturer's mood and interest. We can make inquiry seriously, it is better to make a small bench independently.
jewelry wholesale chicago Materials: four wooden boards, iron nails, sandpaper, transparent paint, glue, tool: 30 cm ruler, hammer, pencil, rubber rubbing, the center and back sides are taken to draw straight lines, and the oblique edge of the 4 board is used. The central line of the 3rd board is aligned as a mark, coated with glue, and then sticks to the No. 4 and No. 2 and 3 plates. 3. Draw the frame on both sides of the combined base with the No. 1 board, combine one side of the glue on one side, fix the other side of the nail, and then wipe off the pencil wire on this side. Use sandpaper to smooth all the surface, write the name and then transparent paint, that is, complete your own small bench.
cheap wholesale fashion jewelry by the dozen in new york The good size of the wooden board is made into two pieces of the wooden board. Put the small wooden board on the half, and then open a triangle mouth on the two wooden boards to prepare to be a stool foot. Then cut the other large wooden board into small pieces of two sizes, 18cm*35cm and 15cm*20cm long pieces. Use flashlight drills and screws to prepare small wooden blocks of the stool feet and fix it on a small wooden block of 15*20. Finally, the 18*35 wooden board is fixed with screws on a small stool on the basic molding.
jp wholesale jewelry The main shell of the stool must choose a hard and thick paper shell. The height of the stool can be consistent with the height of the chair at home. Then draw this one with a knife. Roll up the long strip, determine the diameter of the outermost circle of the cylinder as needed, and then poke a few holes at the two joints and tie it with a rope. After the outer ring is fixed, it is constantly filled until the tube is stuffed and stuffed. Finally, a circular lid is fixed at the top and bottom.